MAX4610CPD

65ns, 28ns SPST - NO 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4610 14 Pins 100pA 3V 14-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4610CPD
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 377
Description: 65ns, 28ns SPST - NO 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4610 14 Pins 100pA 3V 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATES AT 5V AND 12V VCC
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4610
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	9V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	47 ns
Supply Type	Single
Turn-Off Delay Time	100 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	16pF 16pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	65ns, 28ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Voltage - Supply, Single (V+)	2V~12V
Normal Position	NO
Length	19.05mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4610CPD Overview

Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around 0°C~70°C TA extended. 14 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. 14 pins are injected to the electronic part body. Circuits based on SPST - NO switching are used to construct these analog switch ics. 4 circuits are used in this analogue multiplexer. Try searching with MAX4610 if you're looking for variants. It has an internal resistance of 100Ohm. You can find the functions of the 14 pins in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. A voltage higher than 12V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 1μA current. The voltage required by this switch device is 2V~12V, draining from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. It can operate from 9V operating voltages. Don’t miss additional features of the electronic component such as: ALSO OPERATES AT 5V AND 12V VCC.