MAX4610EPD+
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 100Ohm |
| Terminal Finish | TIN |
| Additional Feature | ALSO OPERATES AT 5V AND 12V VCC |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Pin Count | 14 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 16pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 65ns, 28ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω (Typ) |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Length | 19.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
MAX4610EPD+ Overview
As the electronic part is packed in 14-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Around -40°C~85°C is the extended operating temperature. There are 14 terminations totally. A 1 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. As part of its design, the 14 series is equipped with this electronic component. A SPST - NO switching circuit is used to build these analog multiplexers. It consists of 4 circuits. This digital multiplexer has 100Ohm internal resistance. Datasheets for 14 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. 2V should be the lowest voltage fed to the electronic component. Using a single voltage supply, this switch device consumes 2V~12V volts. This electronic part has additional features, such as: ALSO OPERATES AT 5V AND 12V VCC.
MAX4610EPD+ Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4610EPD+ Applications
There are a lot of Maxim Integrated MAX4610EPD+ Analog Switches & Multiplexers ICs applications.
- Communication systems
- Channelized and Unchannelized DS3 applications
- Routers
- Cable PC
- Medical systems
- Cellular phones
- High speed data transmission line cards
- Video signal routing
- Audio/video switches
- Central office
