MAX4610ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 5V AND 12V VCC |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4610 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12V |
| Power Supplies | 3/12V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 16pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 65ns, 28ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
MAX4610ESD+ Overview
The electrical component comes in 14-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. A total of 14 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of its design, the 14 series is equipped with this electronic component. Unlike digital switches, these are based on SPST - NO switching circuits. It consists of 4 circuits. Try searching for MAX4610 variants of the analog switch ic. In this analog multiplexer, the value is Multiplexer or Switches. This analog switch requires a voltage of 2V~12V to drain from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. This electrical component also includes additional features such as ALSO OPERATES AT 5V AND 12V VCC.
MAX4610ESD+ Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4610ESD+ Applications
There are a lot of Maxim Integrated MAX4610ESD+ Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Cellular phones
- Optical Applications
- Switching Systems
- SDH
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Relay Replacement
- Audio and video switching
- Medical Instrumentation
