MAX4610ESD

65ns, 28ns SPST - NO 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4610 14 Pins 100pA 3V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4610ESD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 253
Description: 65ns, 28ns SPST - NO 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4610 14 Pins 100pA 3V 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4610
Output	SEPARATE OUTPUT
Pin Count	14
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	47 ns
Supply Type	Single
Turn-Off Delay Time	100 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	16pF 16pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	65ns, 28ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Voltage - Supply, Single (V+)	2V~12V
Normal Position	NO
Height Seated (Max)	1.75mm
Length	8.65mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATES AT 5V AND 12V VCC
Subcategory	Multiplexer or Switches

MAX4610ESD Overview

The electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Temperatures around -40°C~85°C TA are extended for operation. In total, there are 14 terminations. As a result of its 1 channels, this electronic component provides high-quality output. A 3V voltage supply should turn on and run the electronic component. A total of 14 pins are injected into the body of the electronic part. Circuits based on SPST - NO switching are used to construct these analog switch ics. Circuits number 4 make up this analogue multiplexer. Search with MAX4610 if you are looking for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. The datasheets for the 14 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 12V. An effective Single supply digital multiplexer. There should be 2V voltage fed to the electrical part below 2V. For this multiplexer to operate, 1μA current would be sufficient. This analogue multiplexer requires a voltage of 2V~12V when it drains from a single voltage supply. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. This electrical component also includes additional features such as ALSO OPERATES AT 5V AND 12V VCC.