MAX4611CPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | TIN LEAD |
| Additional Feature | ALSO OPERATES AT 5V AND 12V VCC |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 12V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 16pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 65ns, 28ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4611CPD Overview
The electronic component is convenient to ship overseas because it is packed in a 14-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operation at a temperature around 0°C~70°C TA. Total terminations are 14. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. This electrical component is included in the 14 series of products. SPST - NC switching circuits are used in these analog switch ics. This multiplexer is composed of 4 circuits. This analogue multiplexer requires a voltage of 2V~12V when it drains from a single voltage supply. Don't forget the additional features of this electronic part, such as: ALSO OPERATES AT 5V AND 12V VCC.
MAX4611CPD Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4611CPD Applications
There are a lot of Rochester Electronics, LLC MAX4611CPD Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Medical Instrumentation
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- CSU
- SONET/SDH ADM
- Digital access cross connects
- Microwave transmission systems
- Precision test equipment
- Precision data acquisition
- Mechanical reed relay replacement
