MAX4611CSD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES AT 5V AND 12V VCC |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4611 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12V |
| Power Supplies | 3/12V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 16pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 65ns, 28ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NC |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | ROHS3 Compliant |
MAX4611CSD+ Overview
Packed in 14-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tube. In Surface Mount, this analog switch is mounted. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature extended to 0°C~70°C TA. Totally, there are 14 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. There are 14 pins injected into the electronic part body. Unlike digital switches, these are based on SPST - NC switching circuits. The circuits in this analogue multiplexer number 4. Try searching with MAX4611 if you're looking for variants. The analog multiplexer shown here is a typical Multiplexer or Switches. Using only a single voltage supply, this analog switch requires 2V~12V voltage. There are SEPARATE OUTPUT outputs on this analog switch ic. Don't forget the additional features of this electronic part, such as: ALSO OPERATES AT 5V AND 12V VCC.
MAX4611CSD+ Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4611CSD+ Applications
There are a lot of Maxim Integrated MAX4611CSD+ Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Signal routing between systems
- PBXs
- ATM
- E1 Network Equipment
- Microprocessor controlled systems
- MP3 players
- Automotive applications
- Digital Cross-Connects
- Ultrasound
