Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-TSSOP (0.173, 4.40mm Width) |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATES AT 5V AND 12V VCC |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
MAX4611 |
Output |
SEPARATE OUTPUT |
Pin Count |
14 |
Qualification Status |
Not Qualified |
Supply Voltage-Max (Vsup) |
12V |
Power Supplies |
3/12V |
Number of Channels |
1 |
Number of Circuits |
4 |
Operating Supply Current |
1μA |
Throw Configuration |
SPST |
Supply Type |
Single |
-3db Bandwidth |
300MHz |
On-State Resistance (Max) |
100Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
16pF 16pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
65ns, 28ns |
Charge Injection |
1pC |
Channel-to-Channel Matching (ΔRon) |
1 Ω |
Crosstalk |
-80dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
90ns |
Voltage - Supply, Single (V+) |
2V~12V |
Normal Position |
NC |
Height Seated (Max) |
1.1mm |
Length |
5mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
MAX4611CUD Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around 0°C~70°C TA. In total, there have been 14 terminations. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. A total of 14 pins are injected into the electrical part body. On the other hand, analog switches can be constructed using SPST - NC switching circuits. The circuits in this analogue multiplexer number 4. Search with MAX4611 if you are looking for analog multiplexer variants. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. A analogue multiplexer of this type is a Multiplexer or Switches. Analogue multiplexers of the Single supply type that are cost-effective. An operating current of 1μA would be sufficient for this switch device. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply. There are SEPARATE OUTPUT outputs on this analog switch ic. Additional features of the electronic component include: ALSO OPERATES AT 5V AND 12V VCC.
MAX4611CUD Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4611CUD Applications
There are a lot of Maxim Integrated MAX4611CUD Analog Switches & Multiplexers ICs applications.
- Imaging
- Access Concentrators
- Mechanical reed relay replacement
- Cable Modem
- 65 V DACs
- Precision instrumentation
- Sample-and-hold systems
- SONET/SDH ADM
- Switching Systems
- Relay replacements