MAX4611EPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATES AT 5V AND 12V VCC |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4611 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12V |
| Power Supplies | 3/12V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 16pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 65ns, 28ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NC |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4611EPD Overview
Packed in 14-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 14. As a result of its 1 channels, this electronic component provides high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 14 series. A SPST - NC switching circuit is used for these analog switches. A total of 4 circuits make up this switch device. Try searching with MAX4611 to find analog multiplexer variants. In this analog multiplexer, the value is Multiplexer or Switches. Using only a single voltage supply, this analog switch requires 2V~12V voltage. This analog switch ic utilizes SEPARATE OUTPUT output. This electronic part has additional features, such as: ALSO OPERATES AT 5V AND 12V VCC.
MAX4611EPD Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4611EPD Applications
There are a lot of Maxim Integrated MAX4611EPD Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Fault Tolerant Systems
- USB 1.1 signal switching circuits
- Mechanical reed relay replacement
- Digital access cross connects
- Multi-Line E1 Interface Cards
- High speed data transmission line cards
- Microprocessor Controlled Analog Systems
- Optical Applications
