MAX4612CPD

65ns, 28ns SPST - NO/NC 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4612 14 Pins 100pA 3V 14-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4612CPD
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 787
Description: 65ns, 28ns SPST - NO/NC 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4612 14 Pins 100pA 3V 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2007
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATES AT 5V AND 12V VCC
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4612
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	9V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	47 ns
Supply Type	Single
Turn-Off Delay Time	100 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	16pF 16pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	65ns, 28ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Voltage - Supply, Single (V+)	2V~12V
Length	19.05mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4612CPD Overview

Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. This analog switch is mounted in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around 0°C~70°C TA. In total, 14 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. With a 3V voltage supply, the electrical component should be turned on and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. A SPST - NO/NC switching circuit is used to build these analog multiplexers. There are 4 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MAX4612. In this multiplexer, the internal resistance is 100Ohm. You can find the functions of the 14 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Users shouldn't supply more than 12V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. 2V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 1μA current. A voltage of 2V~12V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 1μA, damage can occur. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 9V operating voltages. This electronic part has additional features, such as: ALSO OPERATES AT 5V AND 12V VCC.