MAX4612ESD

65ns, 28ns SPST - NO/NC 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4612 14 Pins 100pA 3V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4612ESD
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 474
Description: 65ns, 28ns SPST - NO/NC 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4612 14 Pins 100pA 3V 14-SOIC (0.154, 3.90mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATES AT 5V AND 12V VCC
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	245
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	1.27mm
Base Part Number	MAX4612
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	9V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	47 ns
Supply Type	Single
Turn-Off Delay Time	100 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	16pF 16pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	65ns, 28ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Voltage - Supply, Single (V+)	2V~12V
Height Seated (Max)	1.75mm
Length	8.65mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant

MAX4612ESD Overview

Shipping overseas is convenient with the electronic component packed in 14-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 14. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. The electrical component body receives 14 pins. SPST - NO/NC switching circuits are used in these analog switch ics. Circuits number 4 make up this analogue multiplexer. Use MAX4612 to search for variants of the digital switches. In this multiplexer, the internal resistance is 100Ohm. The functions of 14 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 12V. The digital multiplexer has a low cost Single supply. It is recommended that the electrical component receives a voltage of 2V. For this digital switch to work, 1μA current would suffice. The voltage required by this switch device is 2V~12V, draining from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There are SEPARATE OUTPUT outputs on this analog switch ic. A voltage of 9V can be used to operate the electronic component. Additional features include: ALSO OPERATES AT 5V AND 12V VCC.