Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-WQFN Exposed Pad |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
70Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
2.67W |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4613 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Power Supplies |
12/+-15V |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
20V |
Min Supply Voltage |
4.5V |
Operating Supply Current |
1μA |
Nominal Supply Current |
1nA |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
250 ns |
Voltage - Supply, Single/Dual (±) |
4.5V~40V ±4.5V~20V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
120 ns |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
70Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
60 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
4pF 4pF |
On-state Resistance Match-Nom |
4Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
250ns, 120ns |
Charge Injection |
5pC |
Channel-to-Channel Matching (ΔRon) |
4 Ω (Max) |
Crosstalk |
-100dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Height Seated (Max) |
0.8mm |
Length |
5mm |
Width |
5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4613ETE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-WQFN Exposed Pad. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. A total of 4 circuits make up this switch device. Using the MAX4613 search parameter, you can discover variants of the switch. This digital multiplexer has 70Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 20V to the switch device in normal circumstances. Digital switch that provides Dual, Single power at a cost-effective price. There should be 4.5V voltage fed to the electrical part below 4.5V. For this digital switch to work, 1μA current would suffice. It may damage the digital multiplexer if the voltage is higher than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. If you are using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4613ETE+ Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
MAX4613ETE+ Applications
There are a lot of Maxim Integrated MAX4613ETE+ Analog Switches & Multiplexers ICs applications.
- PBX interfaces
- ATM
- CSU
- High speed data transmission line cards
- New designs requiring multiplexer functions
- Relay Replacement
- High reliability control systems
- Isolation
- PDAs
- Cable Modem