MAX4614CPD

12ns, 10ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4614 14 Pins 3.3V 14-DIP (0.300, 7.62mm)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4614CPD
Package: 14-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 724
Description: 12ns, 10ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4614 14 Pins 3.3V 14-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 10ns
Charge Injection	6.5pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-96dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	15ns
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Length	19.05mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	3.3V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4614
Output	SEPARATE OUTPUT
Pin Count	14
Power Supplies	2.5/5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Max Supply Current	1nA
Throw Configuration	SPST
Turn On Delay Time	12 ns
Supply Type	Single
Turn-Off Delay Time	10 ns
-3db Bandwidth	70MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	0.5Ohm

MAX4614CPD Overview

Presented in 14-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around 0°C~70°C TA extended. There are 14 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. With a 3.3V voltage supply, the electrical component should be turned on and run. As part of its design, the 14 series is equipped with this electronic component. Based on SPST - NO switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Using the MAX4614 search parameter, you can discover variants of the switch. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. The functions of 14 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. An operating current of 1μA would be sufficient for this switch device. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1nA. There are SEPARATE OUTPUT outputs on this analog switch ic. This electronic part has additional features, such as: CAN ALSO OPERATE WITH 5 V SUPPLY.