MAX4614ESD
| Parameters | |
|---|---|
| Charge Injection | 6.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 15ns |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE WITH 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4614 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 12ns, 10ns |
MAX4614ESD Overview
Presented in 14-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. 14 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. Turning on and running the electrical part should be easy with a 3.3V voltage supply. The electronic part body is injected with 14 pins. On the other hand, analog switches can be constructed using SPST - NO switching circuits. A total of 4 circuits make up this switch device. MAX4614 can be used to search for analog multiplexer variants. It is a typical Multiplexer or Switches analog multiplexer. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Don't forget the additional features of this electronic part, such as: CAN ALSO OPERATE WITH 5 V SUPPLY.
MAX4614ESD Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 70MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
MAX4614ESD Applications
There are a lot of Maxim Integrated MAX4614ESD Analog Switches & Multiplexers ICs applications.
- HDTV
- T1/E1 Terminals
- Mechanical reed relay replacement
- Sample-and-hold systems
- Precision data acquisition
- Data Acquisition Systems
- Audio signal routing
- Audio and video routing
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- E1 Network Equipment
