MAX4614EUD

12ns, 10ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4614 14 Pins 1nA 3.3V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4614EUD
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 776
Description: 12ns, 10ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4614 14 Pins 1nA 3.3V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4614
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	12 ns
Supply Type	Single
Turn-Off Delay Time	15 ns
-3db Bandwidth	70MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	12ns, 10ns
Charge Injection	6.5pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-96dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2V~5.5V
Normal Position	NO
Height	950μm
Length	5.1mm
Width	4.5mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4614EUD Overview

This electronic part is conveniently packaged in 14-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~85°C TA. In total, there are 14 terminations. A 4 channel electronic part produces high-quality output. With a 3.3V voltage supply, the electrical component should be turned on and run. As part of the design of the 14 series, this electronic part has been incorporated into the system. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Try searching with MAX4614 to find analog multiplexer variants. There is 10Ohm internal resistance in this digital multiplexer. For functions related to 14 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A analog switch ic that has a cost-effective Single supply type. It is recommended that the electrical component receives a voltage of 2V. For this multiplexer to operate, 1μA current would be sufficient. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. 5V operating voltages can be used with this electrical part.