MAX4615CPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE WITH 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4615 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 12ns, 10ns |
| Charge Injection | 6.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 15ns |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Length | 19.05mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4615CPD Overview
Shipping overseas is convenient with the electronic component packed in 14-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. Around 0°C~70°C TA is the extended operating temperature. In total, there have been 14 terminations. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. There is an electrical component included in the 14 series. Based on SPST - NC switching circuits, these analog multiplexers work. 4 circuits are used in this analogue multiplexer. MAX4615 can be used to search for analog multiplexer variants. It has an internal resistance of 10Ohm. For functions related to 14 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 5.5V. In order for the electronic part to function properly, the lowest voltage should be 2V. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. This electrical component also includes additional features such as CAN ALSO OPERATE WITH 5 V SUPPLY.
MAX4615CPD Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 70MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
MAX4615CPD Applications
There are a lot of Maxim Integrated MAX4615CPD Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Audio and video signal routing
- T1/E1 Terminals
- Low-Voltage
- Communication systems
- Channelized and Unchannelized DS3 applications
- Digital access cross connects
- SDH
- Mechanical reed relay replacement
- FTTH
