MAX4615EPD
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4615 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 12ns, 10ns |
| Charge Injection | 6.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 15ns |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE WITH 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
MAX4615EPD Overview
Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Through Hole. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 14. By its 1 channels, the electronic component provides high-quality output. With a 3.3V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 14 series. Based on SPST - NC switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Use MAX4615 to search for variants of the digital switches. In this multiplexer, the internal resistance is 10Ohm. There is a standard Multiplexer or Switches analogue multiplexer here. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Check out the electrical component's additional features, such as the following: CAN ALSO OPERATE WITH 5 V SUPPLY.
MAX4615EPD Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 70MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
MAX4615EPD Applications
There are a lot of Maxim Integrated MAX4615EPD Analog Switches & Multiplexers ICs applications.
- MP3 players
- Audio and video switching
- Cable PC
- High speed data transmission line cards
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Cable Modem
- SONET/SDH ADM
- Access Concentrators
- Relay replacements
- SDH
