MAX4615EUD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Additional Feature | CAN ALSO OPERATE WITH 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4615 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 12ns, 10ns |
| Charge Injection | 6.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 15ns |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NC |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4615EUD+ Overview
Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. In total, there are 14 terminations. The electronic part provides high-quality output because it has 1 channels. A 3.3V voltage supply should turn on and run the electronic component. An electrical component like this is included in the 14 series. A SPST - NC switching circuit is used for these analog switches. There are 4 circuits in this switch device. Look for analog switch ic variants by searching with MAX4615. In this analog multiplexer, the value is Multiplexer or Switches. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. There is also CAN ALSO OPERATE WITH 5 V SUPPLY to look out for in this electronic part.
MAX4615EUD+ Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 70MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
MAX4615EUD+ Applications
There are a lot of Maxim Integrated MAX4615EUD+ Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Relay replacements
- Avionics and Military Systems
- PDH Multiplexers
- Precision data acquisition
- Automatic test equipment
- E1 Network Equipment
- DSUs
- Digital access cross connects
- Existing multiplexer applications (both fault-protected and nonfault-protected)
