MAX4616CUD

12ns, 10ns SPST - NO/NC 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4616 14 Pins 3.3V 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4616CUD
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 580
Description: 12ns, 10ns SPST - NO/NC 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4616 14 Pins 3.3V 14-TSSOP (0.173, 4.40mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	10Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	CAN ALSO OPERATE WITH 5 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4616
Output	SEPARATE OUTPUT
Pin Count	14
Power Supplies	2.5/5V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	12 ns
Supply Type	Single
Turn-Off Delay Time	10 ns
-3db Bandwidth	70MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Channel Capacitance (CS(off), CD(off))	5pF 5pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	12ns, 10ns
Charge Injection	6.5pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-96dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	15ns
Voltage - Supply, Single (V+)	2V~5.5V
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

MAX4616CUD Overview

Shipping overseas is convenient due to the electrical component's packing in 14-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operating temperature extended to 0°C~70°C TA. In total, there are 14 terminations. The electronic part provides high-quality output because it has 1 channels. A 3.3V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 14 pins. A SPST - NO/NC switching circuit is used for these analog switches. This multiplexer is composed of 4 circuits. Try searching with MAX4616 to find analog multiplexer variants. As far as internal resistance is concerned, it has 10Ohm. Datasheets for 14 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. It is recommended to use 2V as the lowest voltage for the electrical part. For this multiplexer to operate, 1μA current would be sufficient. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. Putting voltage greater than 1μA on the multiplexer may cause damage. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. Don't forget the additional features of this electronic part, such as: CAN ALSO OPERATE WITH 5 V SUPPLY.