MAX4616CUD+
| Parameters | |
|---|---|
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 12ns, 10ns |
| Charge Injection | 6.5pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 15ns |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5 V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4616 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 70MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| On-state Resistance Match-Nom | 0.5Ohm |
MAX4616CUD+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. Surface Mount is where this multiplexer is located. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. In total, there have been 14 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. A total of 14 pins are injected into the electrical part body. The analog switch ics are built using SPST - NO/NC switching circuits. This multiplexer is composed of 4 circuits. Try searching with MAX4616 to find analog multiplexer variants. The analog multiplexer shown here is a typical Multiplexer or Switches. Using a single voltage supply, this switch device consumes 2V~5.5V volts. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. This electrical component also includes additional features such as CAN ALSO OPERATE WITH 5 V SUPPLY.
MAX4616CUD+ Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 70MHz
Additional Features: CAN ALSO OPERATE WITH 5 V SUPPLY
MAX4616CUD+ Applications
There are a lot of Maxim Integrated MAX4616CUD+ Analog Switches & Multiplexers ICs applications.
- Communication systems
- Multi-Line E1 Interface Cards
- High speed data transmission line cards
- Microprocessor controlled systems
- PBX interfaces
- New designs requiring multiplexer functions
- PDH Multiplexers
- Avionics and Military Systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Existing multiplexer applications (both fault-protected and nonfault-protected)
