MAX4617CPE
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Max Power Dissipation | 842mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4617 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Throw Configuration | SP8T |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 75mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 27pF |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4617CPE Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. The multiplexer is located in Through Hole. Multiplexer and demultiplexer circuits have a number 8:1. Operating temperature extended to 0°C~70°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. There are 1 circuits in this switch device. Using the MAX4617 search parameter, you can discover variants of the switch. An switch multiplexer with 10Ohm internal resistance has a value of 10Ohm. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 1μA current. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. Operating voltages range from 5V.
MAX4617CPE Features
8 Channels
1μA Supply Current
MAX4617CPE Applications
There are a lot of Maxim Integrated MAX4617CPE Analog Switches & Multiplexers ICs applications.
- CSU
- Sample hold systems
- Communication systems
- Precision data acquisition
- Remote Powered Equipment
- PCMCIA cards
- Avionics test equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Audio and video switching
- Medical Instrumentation
