MAX4617CSE+
| Parameters | |
|---|---|
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 27pF |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4617 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
MAX4617CSE+ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Extended operating temperature around 0°C~70°C TA. In total, 16 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. When the electronic component is given a voltage of 3.3V, it should be turned on and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with MAX4617. Internally, this switch multiplexer has a resistance of 2.5Ohm. The datasheets for the 16 pins explain the functions. This switch device is a typical Multiplexer or Switches. A voltage of 2V~5.5V is required to drain this analog switch from a single voltage supply. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module.
MAX4617CSE+ Features
8 Channels
MAX4617CSE+ Applications
There are a lot of Maxim Integrated MAX4617CSE+ Analog Switches & Multiplexers ICs applications.
- Cable PC
- Mechanical reed relay replacement
- Avionics
- DSLAMs
- Medical Instrumentation
- Ultrasound
- Switching Systems
- Access Concentrators
- Battery Powered Instruments
- CSU
