MAX4617CSE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4617 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Throw Configuration | SP8T |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 27pF |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4617CSE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. Operating temperature extended to 0°C~70°C TA. A total of 16 terminations have been recorded. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 3.3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits number 1 make up this analogue multiplexer. Use MAX4617 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 10Ohm. Datasheets for 16 pin functions are available upon request. A voltage higher than 5.5V should not normally be supplied to the switches. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. In order to operate this switch device, it would need a current of 1μA. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. It can operate from 5V operating voltages.
MAX4617CSE Features
8 Channels
1μA Supply Current
MAX4617CSE Applications
There are a lot of Maxim Integrated MAX4617CSE Analog Switches & Multiplexers ICs applications.
- PDAs
- Microwave transmission systems
- HDTV
- Private Branch Exchange (PBX)
- DSLAMs
- Medical Instrumentation
- Microprocessor controlled systems
- Power routing
- Remote Powered Equipment
- E1 Network Equipment
