MAX4617ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4617 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 27pF |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4617ESE+ Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tube. It is mounted in the position Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 8 channels. A 3.3V voltage supply should turn on and run the electronic component. A key feature of the 16 series is the inclusion of this electronic part as part of its design. There are 1 circuits in this multiplexer. If you are looking for variants of the digital switch, trying search with MAX4617. For details about the functions of 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Draining from a single voltage supply, this analog switch requires a voltage of 2V~5.5V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board.
MAX4617ESE+ Features
8 Channels
MAX4617ESE+ Applications
There are a lot of Maxim Integrated MAX4617ESE+ Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Access Concentrators
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Private Branch Exchange (PBX)
- ISDN NT1/TA
- Automotive applications
- Low-Voltage
- Transmit
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fault Tolerant Systems
