MAX4617ESE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4617 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Throw Configuration | SP8T |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 27pF |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4617ESE Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. Surface Mount is where this multiplexer is located. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. In total, there are 16 terminations. The electronic part delivers high-quality output through its 8 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. This multiplexer is composed of 1 circuits. MAX4617 can be used to search for analog multiplexer variants. Analog switches have 10Ohm internal resistance. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Single supply. A low voltage of 2V should be applied to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. Operating voltages range from 5V.
MAX4617ESE Features
8 Channels
1μA Supply Current
MAX4617ESE Applications
There are a lot of Maxim Integrated MAX4617ESE Analog Switches & Multiplexers ICs applications.
- Relay replacements
- Channelized and Unchannelized DS3 applications
- Digital Cross-Connects
- Precision test equipment
- Private Branch Exchange (PBX)
- Automatic test equipment
- Fiber In The Loop (FITL)
- Audio signal routing
- Residential Gateways, Home Gateway/Router
- Medical Instrumentation
