Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
10Ohm |
Max Power Dissipation |
533mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4617 |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Propagation Delay |
15 ns |
Turn On Delay Time |
20 ns |
Logic Function |
Multiplexer |
Supply Type |
Single |
Turn-Off Delay Time |
15 ns |
On-State Resistance (Max) |
10Ohm |
High Level Output Current |
75mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 27pF |
Switch Time (Ton, Toff) (Max) |
15ns, 10ns |
Charge Injection |
3pC |
Channel-to-Channel Matching (ΔRon) |
200m Ω |
Crosstalk |
-96dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
2V~5.5V |
Signal Current-Max |
0.075A |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4617EUE+T Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 16. Due to its 8 channels, the electrical component produces high-quality output. An 3.3V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 16 series is equipped with this electronic component. This multiplexer is composed of 1 circuits. Using the MAX4617 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 10Ohm. The datasheets for the 16 pins explain the functions. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. There should be 2V voltage fed to the electrical part below 2V. This multiplexer would work with 1μA current. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage. 5V operating voltages can be used with this electrical part.
MAX4617EUE+T Features
8 Channels
1μA Supply Current
MAX4617EUE+T Applications
There are a lot of Maxim Integrated MAX4617EUE+T Analog Switches & Multiplexers ICs applications.
- RGB switches
- USB 1.1 signal switching circuits
- Channelized and Unchannelized DS3 applications
- High-Voltage
- Audio and video signal routing
- Modems
- Video switching
- PBXs
- Precision data acquisition
- SDH/SONET multiplexers