MAX4618CEE+T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 10Ohm |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Terminal Pitch | 0.635mm |
| Base Part Number | MAX4618 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.01mA |
| Turn-Off Delay Time | 15 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 15pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4618CEE+T Overview
Packed in 16-SSOP (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Around 0°C~70°C TA is the extended operating temperature. The total number of terminations is 16. A 4 channel electronic part produces high-quality output. The analog switch ics are built using SP4T switching circuits. The circuits in this analogue multiplexer number 2. MAX4618 can be used to search for analog multiplexer variants. It has an internal resistance of 10Ohm. For functions related to 16 pins, please refer to the datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. Single supply type digital switch with a low cost. 2V is the lowest voltage the electrical component should receive. An operating current of 1μA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 2V~5.5V volts. A voltage of 5V can be used to operate the electronic component.
MAX4618CEE+T Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
MAX4618CEE+T Applications
There are a lot of Maxim Integrated MAX4618CEE+T Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Audio/video switches
- Precision instrumentation
- Switching Systems
- DVD-R
- PDAs
- CSU
- Sample hold systems
- Wireless Local Loop
- MP3 players
