MAX4618ESE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4618 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Supply Current-Max (Isup) | 0.01mA |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 15pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4618ESE+T Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 4:1. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 16. By its 4 channels, the electronic component provides high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. The analog switch ics are built using SP4T switching circuits. A 2 circuit is present in this switch device. Search with MAX4618 if you are looking for analog multiplexer variants. A analogue multiplexer of this type is a Multiplexer or Switches. Using a single voltage supply, this switch device consumes 2V~5.5V volts. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.
MAX4618ESE+T Features
4 Channels
Switch Circuit: SP4T
MAX4618ESE+T Applications
There are a lot of Maxim Integrated MAX4618ESE+T Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- ISDN NT1/TA
- Sample-and-hold systems
- Microprocessor controlled systems
- RGB switches
- DVD-R
- Remote Powered Equipment
- ATM
- Medical Instrumentation
- Data Acquisition Systems
