MAX4618EUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4618 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Supply Current-Max (Isup) | 0.01mA |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 15pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX4618EUE+ Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 4 channels. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. The electrical component body receives 16 pins. Based on SP4T switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 2. Try searching for MAX4618 variants of the analog switch ic. The datasheets for the 16 pins explain the functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.
MAX4618EUE+ Features
4 Channels
Switch Circuit: SP4T
MAX4618EUE+ Applications
There are a lot of Maxim Integrated MAX4618EUE+ Analog Switches & Multiplexers ICs applications.
- Avionics
- Sample hold systems
- 65 V DACs
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Communication systems
- Imaging
- Audio signal routing
- Access Concentrators
- Microwave transmission systems
- Battery-powered systems
