MAX4618EUE
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 15pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
MAX4618EUE Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 4:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. The electronic part delivers high-quality output through its 4 channels. In the case of a voltage supply of 3.3V volts, the electrical part can be powered up and run. It is part of the design of the 16 series that this electronic component is included. Unlike digital switches, these are based on SP4T switching circuits. The multiplexer consists of 2 circuits. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs.
MAX4618EUE Features
4 Channels
Switch Circuit: SP4T
MAX4618EUE Applications
There are a lot of Rochester Electronics, LLC MAX4618EUE Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video routing
- Routers
- Fiber to the Home
- Isolation
- E1 Multiplexer
- New designs requiring multiplexer functions
- Multiplexers
- Industrial
