MAX4619CPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 8.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Height Seated (Max) | 4.572mm |
| Length | 19.175mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4619CPE Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have a ratio of 2:1. Around 0°C~70°C TA is the extended operating temperature. In total, there are 16 terminations. The electronic part delivers high-quality output through its 1 channels. When a voltage supply of 3.3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. A SPDT switching circuit is used to build these analog multiplexers. It consists of 3 circuits. The voltage required by this switch device is 2V~5.5V, draining from a single voltage supply.
MAX4619CPE Features
1 Channels
Switch Circuit: SPDT
MAX4619CPE Applications
There are a lot of Rochester Electronics, LLC MAX4619CPE Analog Switches & Multiplexers ICs applications.
- Cable Modem
- CSU
- Fiber In The Loop (FITL)
- SONET
- Industrial
- Transmit
- Routers
- Communications systems
- Imaging
- Microwave transmission systems
