MAX4619CUE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4619 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/5V |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Supply Current-Max (Isup) | 0.01mA |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 8.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 15ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
MAX4619CUE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around 0°C~70°C TA. 16 terminations have been made so far. High-quality output is provided by the electronic component's 1 channels. A 3.3V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 3 make up this analogue multiplexer. Try searching with MAX4619 if you're looking for variants. The datasheets for the 16 pins explain the functions. In this analog multiplexer, the value is Multiplexer or Switches. Using only a single voltage supply, this analog switch requires 2V~5.5V voltage.
MAX4619CUE+ Features
1 Channels
Switch Circuit: SPDT
MAX4619CUE+ Applications
There are a lot of Maxim Integrated MAX4619CUE+ Analog Switches & Multiplexers ICs applications.
- DSUs
- Communication systems
- Frame Relay Equipment
- Precision test equipment
- Wireless Local Loop
- T1/E1 Terminals
- Multiplexers
- Microprocessor Controlled Analog Systems
- Precision data acquisition
- Precision instrumentation
