MAX4619CUE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Power Dissipation | 533mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4619 |
| Pin Count | 16 |
| Power Supplies | 2.5/5V |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Logic Function | Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.01mA |
| Turn-Off Delay Time | 10 ns |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 8.5pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 200m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.075A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4619CUE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. An extended operating temperature of 0°C~70°C TA degrees Celsius. 16 terminations have been made so far. The electronic part delivers high-quality output through its 3 channels. It is safe to turn on and run the electronic component with a 3.3V voltage supply. The electrical component body receives 16 pins. The analog switch ics are built using SPDT switching circuits. Look for analog switch ic variants by searching with MAX4619. Internally, this switch multiplexer has a resistance of 10Ohm. The functions of 16 pins can be found in the datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. Single supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. An operating current of 1μA would be sufficient for this switch device. This analog switch requires a voltage of 2V~5.5V to drain from a single voltage supply.
MAX4619CUE Features
3 Channels
Switch Circuit: SPDT
1μA Supply Current
MAX4619CUE Applications
There are a lot of Maxim Integrated MAX4619CUE Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- Ultrasound
- Imaging
- Transmit
- Frame Relay Equipment
- Communication systems
- RGB switches
- E1 Network Equipment
- Precision instrumentation
- Cross Connects
