MAX4620EUD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4620 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 8.5pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -96dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 100ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
MAX4620EUD+ Overview
The electronic component is convenient to ship overseas because it is packed in a 14-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. Total terminations are 14. By its 1 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. The electronic part body is injected with 14 pins. A SPST - NO switching circuit is used to build these analog multiplexers. A total of 4 circuits make up this switch device. Try searching with MAX4620 if you're looking for variants. For details about the functions of 14 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Using a single voltage supply, this switch device consumes 2V~12V volts. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.
MAX4620EUD+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4620EUD+ Applications
There are a lot of Maxim Integrated MAX4620EUD+ Analog Switches & Multiplexers ICs applications.
- PBXs
- SDH
- Medical Instrumentation
- Precision test equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- DVD-R
- Automotive applications
- T1/E1 Terminals
- Transmit
- DSUs
