MAX4622ESE
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 5Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 696mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4622 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Number of Channels | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 1nA |
| Max Supply Current | 1nA |
| Turn On Delay Time | 250 ns |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~18V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 200 μs |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 5Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 9V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 34pF 34pF |
| On-state Resistance Match-Nom | 0.25Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 480pC |
| Channel-to-Channel Matching (ΔRon) | 250m Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4622ESE Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 2 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPDT switching circuits. Use MAX4622 to search for variants of the digital switches. As far as internal resistance is concerned, it has 5Ohm. Datasheets for functions of 16 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. Multiplexers should not be powered above 36V in normal situations. Analogue multiplexers of the Dual, Single supply type that are cost-effective. A low voltage of 4.5V should be applied to the electronic component. Put voltage above 1nA on the multiplexer to cause damage. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 20V. For dual power supplies, a voltage of at least 4.5V should be attached. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A voltage of 20V can be used to operate the electronic component.
MAX4622ESE Features
2 Channels
Switch Circuit: SPDT
MAX4622ESE Applications
There are a lot of Maxim Integrated MAX4622ESE Analog Switches & Multiplexers ICs applications.
- Channel Banks
- High reliability control systems
- Video signal routing
- Video switching
- Fiber to the Home
- ATM
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Automotive applications
- Medical systems
- Routers
