MAX4623CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4623 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 34pF 34pF |
| On-state Resistance Match-Nom | 0.25Ohm |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 250ns, 200ns |
| Charge Injection | 480pC |
| Channel-to-Channel Matching (ΔRon) | 250m Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NO |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
MAX4623CPE+ Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. There is 2:1 ratio between the number of multiplexers and demultiplexers. Temperatures around 0°C~70°C TA are extended for operation. The total number of terminations is 16. A 2 channel electronic part produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 16 pins. These analog multiplexers are built based on DPST - NO switching circuits. It consists of 2 circuits. Look for analog switch ic variants by searching with MAX4623. Theswitch device is a typical Multiplexer or Switches. A total of SEPARATE OUTPUT outputs are available on this analog switch ic.
MAX4623CPE+ Features
2 Channels
Switch Circuit: DPST - NO
MAX4623CPE+ Applications
There are a lot of Maxim Integrated MAX4623CPE+ Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Audio and video signal routing
- Isolation
- Fiber In The Loop (FITL)
- Cross Connects
- Medical Instrumentation
- Cable Modem
- New designs requiring multiplexer functions
- Data Acquisition Systems
- FTTH
