Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Published |
1999 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4623 |
Pin Count |
16 |
Number of Channels |
2 |
Number of Circuits |
2 |
Max Supply Voltage |
36V |
Min Supply Voltage |
4.5V |
Voltage - Supply, Single/Dual (±) |
4.5V~36V ±4.5V~18V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Max Dual Supply Voltage |
20V |
On-State Resistance (Max) |
5Ohm |
Min Dual Supply Voltage |
4.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
34pF 34pF |
On-state Resistance Match-Nom |
0.25Ohm |
Switch Circuit |
DPST - NO |
Switch Time (Ton, Toff) (Max) |
250ns, 200ns |
Charge Injection |
480pC |
Channel-to-Channel Matching (ΔRon) |
250m Ω (Typ) |
Crosstalk |
-60dB @ 1MHz |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
MAX4623CSE+ Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to 0°C~70°C. The total number of terminations is 16. A 2 channel electronic part produces high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Circuits based on DPST - NO switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with MAX4623. The internal resistance of this digital multiplexer is 5Ohm. To find out what the 16 pins do, please refer to the datasheets. Users should never supply a voltage higher than 36V to a switch device. 4.5V should be the lowest voltage fed to the electronic component. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 20V. It is recommended that you attach at least 4.5V to your dual power supply.
MAX4623CSE+ Features
2 Channels
Switch Circuit: DPST - NO
MAX4623CSE+ Applications
There are a lot of Maxim Integrated MAX4623CSE+ Analog Switches & Multiplexers ICs applications.
- MP3 players
- Automotive applications
- PCMCIA cards
- Cross Connects
- Relay Replacement
- Frame Relay Equipment
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Data Acquisition Systems
- Channel Banks
- Voice over IP/DSL – Integrated Access Devices, Smart