Parameters |
Off-state Isolation-Nom |
57 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
32pF |
On-state Resistance Match-Nom |
0.06Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
50ns, 50ns |
Charge Injection |
65pC |
Channel-to-Channel Matching (ΔRon) |
60m Ω |
Crosstalk |
-57dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Drain to Source Resistance |
3Ohm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 Thin, TSOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2001 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
1Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
MAX4624 |
Pin Count |
6 |
Power Supplies |
3/5V |
Number of Channels |
1 |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Max Supply Current |
10μA |
Number of Bits |
2 |
Turn On Delay Time |
50 ns |
Supply Type |
Single |
Turn-Off Delay Time |
50 ns |
On-State Resistance (Max) |
1Ohm |
High Level Output Current |
200mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
MAX4624EZT+T Overview
This electronic part is conveniently packaged in SOT-23-6 Thin, TSOT-23-6, making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operational temperature extended around -40°C~85°C TA. In total, there are 6 terminations. By its 1 channels, the electronic component provides high-quality output. Powered by a 5V voltage supply, the electrical part should be switched on and run. As part of its design, the 6 series is equipped with this electronic component. Circuits based on SPDT switching are used to construct these analog switch ics. A total of 1 circuits make up this switch device. Using the MAX4624 search parameter, you can discover variants of the switch. There is 1Ohm internal resistance in this digital multiplexer. The functions of 6 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended to use 1.8V as the lowest voltage for the electrical part. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. Putting voltage greater than 10μA on the multiplexer may cause damage. Drain to Source resistance for this electronic component is 3Ohm. The switch device is capable of conducting in a 2-bit mode.
MAX4624EZT+T Features
1 Channels
Switch Circuit: SPDT
Drain-to-Source resistance: 3Ohm
2-Bit
MAX4624EZT+T Applications
There are a lot of Maxim Integrated MAX4624EZT+T Analog Switches & Multiplexers ICs applications.
- Industrial
- Sample hold systems
- Industrial and process control systems
- Access Concentrators
- Avionics and Military Systems
- High-Voltage
- PBXs
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Residential Gateways, Home Gateway/Router
- Digital cross connects (DSX-1)