MAX4625EUT+T

50ns, 50ns SPDT 1Ohm DUAL Analog Switches MAKE-BEFORE-BREAK MAX4625 6 Pins 2nA 5V SOT-23-6

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4625EUT+T
Package: SOT-23-6
Datasheet: PDF
Stock: 630
Description: 50ns, 50ns SPDT 1Ohm DUAL Analog Switches MAKE-BEFORE-BREAK MAX4625 6 Pins 2nA 5V SOT-23-6(Kg)

Details

Tags

Parameters
On-state Resistance Match-Nom	0.06Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 50ns
Charge Injection	65pC
Channel-to-Channel Matching (ΔRon)	60m Ω
Crosstalk	-57dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	1Ohm
Length	2.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	36.003894mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2001
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	1Ohm
Additional Feature	IT CAN ALSO OPERATE WITH 3 V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	571mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.95mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4625
Pin Count	6
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Nominal Supply Current	10μA
Max Supply Current	10μA
Number of Bits	4
Turn On Delay Time	50 ns
Supply Type	Single
Turn-Off Delay Time	50 ns
On-State Resistance (Max)	1Ohm
High Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	57 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	32pF

MAX4625EUT+T Overview

This electronic part is conveniently packaged in SOT-23-6, making it easy to ship abroad. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. A total of 6 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. An injection of 6 pins is performed into the body of the electrical component. SPDT switching circuits are used in these analog switch ics. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with MAX4625. Analog switches have 1Ohm internal resistance. The functions of 6 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 5.5V in normal situations. A analog switch ic that has a cost-effective Single supply type. In order for the electronic part to function properly, the lowest voltage should be 1.8V. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 10μA. Operating voltages of 5V are compatible with the electrical part. There is also IT CAN ALSO OPERATE WITH 3 V SUPPLY to look out for in this electronic part. Drain to Source resistance is 1Ohm. 4-bit operation is possible.