MAX4628EUT-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 500mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 571mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4628 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 10μA |
| Max Supply Current | 10μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 80 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 40 ns |
| On-State Resistance (Max) | 500mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 51 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 65pF 65pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 50ns, 30ns |
| Charge Injection | 40pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Switch-off Time-Max | 50ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX4628EUT-T Overview
Packed in SOT-23-6, the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. In total, 6 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. A 3V voltage supply should turn on and run the electronic component. There is an electrical component included in the 6 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with MAX4628. A 500mOhm internal resistance characterizes this multiplexer. To find out what the 6 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. A low voltage of 1.8V should be applied to the electronic component. For this multiplexer to operate, 10μA current would be sufficient. Using only a single voltage supply, this analog switch requires 1.8V~5.5V voltage. It may damage the digital multiplexer if the voltage is higher than 10μA. A voltage of 5V can be used to operate the electronic component.
MAX4628EUT-T Features
1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
MAX4628EUT-T Applications
There are a lot of Maxim Integrated MAX4628EUT-T Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- Battery Powered Systems
- Cable PC
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Automotive applications
- Channel Banks
- ATM
- Sample-and-hold systems
- Medical Instrumentation
- PBXs
