MAX4630EPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Resistance | 70Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4630 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 12pF |
| On-state Resistance Match-Nom | 0.6Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 80ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 150ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NC |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4630EPD Overview
Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tube is used. Multiplexers like this are mounted in the Through Hole position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 14 terminations. Due to its 1 channels, the electrical component produces high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 14 pins. Unlike digital switches, these are based on SPST - NC switching circuits. Circuits number 4 make up this analogue multiplexer. MAX4630 can be used to search for analog multiplexer variants. Analog switches have 70Ohm internal resistance. In this analog multiplexer, the value is Multiplexer or Switches. A voltage of 2V~12V is required for this switch device, which drains from a single voltage source. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX4630EPD Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 300MHz
MAX4630EPD Applications
There are a lot of Maxim Integrated MAX4630EPD Analog Switches & Multiplexers ICs applications.
- Imaging
- Audio signal routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- Ultrasound
- PCMCIA cards
- Optical Applications
- PDH Multiplexers
- Cable PC
- RGB switches
- DSLAMs
