MAX4631ESE+
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 85Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 9V |
| Analog IC - Other Type | SPST |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 18V |
| Min Dual Supply Voltage | 4.5V |
| Off-state Isolation-Nom | 62 dB |
| On-state Resistance Match-Nom | 3Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 500ns |
| Switch-off Time-Max | 400ns |
| Normal Position | NO |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4631ESE+ Overview
Shipping overseas is convenient with the electronic component packed in SOIC. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 16 pins. Circuits number 2 make up this analogue multiplexer. In this multiplexer, the internal resistance is 85Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 36V voltage to the switch device. 9V should be the lowest voltage fed to the electronic component. Despite this switch's dual supply capability, its voltage should not exceed 18V. If you are using dual power supplies, you should attach at least 4.5V. There is an analog IC SPST integrated with this board. Temperatures over 85°C should not be allowed for the multiplexer to operate.
MAX4631ESE+ Features
1 Channels
MAX4631ESE+ Applications
There are a lot of Maxim Integrated MAX4631ESE+ Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Microwave transmission systems
- Multi-Line E1 Interface Cards
- Transmit
- PDH Multiplexers
- Audio/video switches
- Data Acquisition Systems
- Digital access cross connects
- Avionics and Military Systems
- Industrial control systems
