MAX4638ESE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4638 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | +-2.5/3/5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 50MHz |
| On-State Resistance (Max) | 3.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Time (Ton, Toff) (Max) | 18ns, 7ns |
| Charge Injection | 13pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 20ns |
| Signal Current-Max | 0.03A |
| Length | 9.9mm |
| RoHS Status | ROHS3 Compliant |
MAX4638ESE+ Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. Surface Mount is where this multiplexer is located. 8:1 is the ratio of multiplexer to demultiplexer circuits. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. Into the electrical component body are injected 16 pins. Circuits number 1 make up this analogue multiplexer. Try searching with MAX4638 if you're looking for variants. Datasheets for functions of 16 pins are available. This switch device is a typical Multiplexer or Switches. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER.
MAX4638ESE+ Features
8 Channels
-3db Bandwidth: 50MHz
MAX4638ESE+ Applications
There are a lot of Maxim Integrated MAX4638ESE+ Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Audio and video routing
- Frame Relay Equipment
- PBX interfaces
- E1 Network Equipment
- SONET
- Power routing
- Isolation
- Medical systems
- PCMCIA cards
