MAX4638EUE+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 457mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4638 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 50MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 9 ns |
| Max Dual Supply Voltage | 2.75V |
| On-State Resistance (Max) | 3.5Ohm |
| Min Dual Supply Voltage | 900mV |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 40pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Time (Ton, Toff) (Max) | 18ns, 7ns |
| Charge Injection | 13pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX4638EUE+T Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. This electrical component is included in the 16 series of products. A total of 1 circuits make up this switch device. Try searching with MAX4638 to find analog multiplexer variants. It has an internal resistance of 3.5Ohm. The datasheets for the 16 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The analog switch ic is of the Dual, Single supply type and is cost-effective. A low voltage of 1.8V should be applied to the electronic component. For this digital switch to work, 1μA current would suffice. For this multiplexer, dual supply voltage is feasible, but it should not exceed 2.75V. It is recommended that you attach at least 900mV to your dual power supply. 5V operating voltages can be used with this electrical part. It is possible to transfer data over a 50MHz-bandwidth.
MAX4638EUE+T Features
8 Channels
1μA Supply Current
Bandwidth: 50MHz
MAX4638EUE+T Applications
There are a lot of Maxim Integrated MAX4638EUE+T Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Digital cross connects (DSX-1)
- Avionics and Military Systems
- T1/E1 Terminals
- Switching Systems
- Fiber to the Home
- Precision test equipment
- Optical Applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- SONET
