MAX4639EUE+
| Parameters | |
|---|---|
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 20pF |
| On-state Resistance Match-Nom | 0.2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 18ns, 7ns |
| Charge Injection | 13pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 7ns |
| Height | 950μm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 457mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4639 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1μA |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 20 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 85MHz |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 9 ns |
| Max Dual Supply Voltage | 2.75V |
| On-State Resistance (Max) | 3.5Ohm |
| Min Dual Supply Voltage | 900mV |
MAX4639EUE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 4:1. Extended operating temperature around -40°C~85°C TA. In total, 16 terminations have occurred. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. A SP4T switching circuit is used for these analog switches. It consists of 2 circuits. Use MAX4639 to search for variants of the digital switches. In this multiplexer, the internal resistance is 3.5Ohm. The functions of 16 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 1.8V as the lowest voltage for the electrical part. For this multiplexer to operate, 1μA current would be sufficient. Despite this switch's dual supply capability, its voltage should not exceed 2.75V. In the case of dual power supplies, you should connect at least 900mV. 5V operating voltages are supported by the electronic component. In 85MHz-bandwidths, data can be transferred.
MAX4639EUE+ Features
4 Channels
Switch Circuit: SP4T
1μA Supply Current
Bandwidth: 85MHz
MAX4639EUE+ Applications
There are a lot of Maxim Integrated MAX4639EUE+ Analog Switches & Multiplexers ICs applications.
- Industrial
- Communication systems
- Ultrasound
- Communications systems
- DSUs
- Communication systems
- New designs requiring multiplexer functions
- Cellular phones
- Microprocessor Controlled Analog Systems
- High-Voltage
