Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2000 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
70Ohm |
Terminal Finish |
MATTE TIN |
Max Power Dissipation |
640mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
3V |
Terminal Pitch |
1.27mm |
Base Part Number |
MAX4640 |
Pin Count |
14 |
Number of Channels |
1 |
Number of Circuits |
4 |
Max Supply Voltage |
12V |
Min Supply Voltage |
2V |
Operating Supply Current |
1μA |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
150 ns |
Supply Type |
Single |
Turn-Off Delay Time |
80 ns |
-3db Bandwidth |
300MHz |
On-State Resistance (Max) |
70Ohm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
20pF 12pF |
On-state Resistance Match-Nom |
3Ohm |
Switch Circuit |
SPST - NO/NC |
Switch Time (Ton, Toff) (Max) |
150ns, 80ns |
Charge Injection |
5pC |
Channel-to-Channel Matching (ΔRon) |
500m Ω |
Crosstalk |
-90dB @ 1MHz |
Switch-on Time-Max |
250ns |
Switch-off Time-Max |
100ns |
Voltage - Supply, Single (V+) |
2V~12V |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX4640ESD+ Overview
Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.154, 3.90mm Width). The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~85°C TA. 14 terminations have been made so far. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 14 pins are injected into the body of the electronic part. The analog switch ics are built using SPST - NO/NC switching circuits. There are 4 circuits in this multiplexer. Try searching with MAX4640 if you're looking for variants. There is 70Ohm internal resistance in this digital multiplexer. To find out what the functions of 14 pins are, please refer to their datasheets. Users shouldn't supply more than 12V voltage to the switch device. Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 2V. The analogue multiplexer could operate on 1μA current. This analogue multiplexer requires a voltage of 2V~12V when it drains from a single voltage supply. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer.
MAX4640ESD+ Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
-3db Bandwidth: 300MHz
MAX4640ESD+ Applications
There are a lot of Maxim Integrated MAX4640ESD+ Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Medical Instrumentation
- DSUs
- HDTV
- Audio signal routing
- Industrial control systems
- Data Acquisition Systems
- Data switching
- Residential Gateways, Home Gateway/Router
- Central office