MAX4640ESD+T
| Parameters | |
|---|---|
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4640 |
| Pin Count | 14 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Max Supply Voltage | 12V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Throw Configuration | SPST |
| Supply Type | Single |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 70Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 20pF 12pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 80ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 100ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 70Ohm |
| Terminal Finish | TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
MAX4640ESD+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 1:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 14 terminations. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 14 pins are injected into the electrical part body. A SPST - NO/NC switching circuit is used to build these analog multiplexers. This multiplexer is composed of 4 circuits. Look for analog switch ic variants by searching with MAX4640. In this multiplexer, the internal resistance is 70Ohm. normally, users should not supply switches with voltages higher than 12V. Analogue multiplexer with a Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 2V. This digital switch can be operated with a current of 1μA. A voltage of 2V~12V is required for this switch device, which drains from a single voltage source.
MAX4640ESD+T Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
-3db Bandwidth: 300MHz
MAX4640ESD+T Applications
There are a lot of Maxim Integrated MAX4640ESD+T Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Medical systems
- Relay replacements
- Digital cross connects (DSX-1)
- Precision data acquisition
- Precision test equipment
- Microprocessor controlled systems
- Data Acquisition Systems
- Microprocessor Controlled Analog Systems
- SONET/SDH ADM
