MAX4644EUA+

15ns, 5ns SPDT 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4644 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Manufacturer: Maxim Integrated
Nocochips NO: 503-MAX4644EUA+
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 526
Description: 15ns, 5ns SPDT 4Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4644 8 Pins 250pA 3V 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	4Ohm
Additional Feature	CAN ALSO OPERATE WITH 5V SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	362mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4644
Pin Count	8
Power Supplies	3/5V
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Max Supply Current	1nA
Number of Bits	2
Turn On Delay Time	15 ns
Supply Type	Single
Turn-Off Delay Time	5 ns
On-State Resistance (Max)	4Ohm
High Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	12pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	15ns, 5ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-82dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	4Ohm
Height	950μm
Length	3.1mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

MAX4644EUA+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Around -40°C~85°C TA is the extended operating temperature. In total, there are 8 terminations. The electronic part delivers high-quality output through its 1 channels. A 3V voltage supply should turn on and run the electronic component. This electrical component is included in the 8 series of products. Unlike digital switches, these are based on SPDT switching circuits. There are 1 circuits in this switch device. Try searching for MAX4644 variants of the analog switch ic. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. You can find the functions of the 8 pins in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A analog switch ic that has a cost-effective Single supply type. 1.8V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 1μA current. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 1nA, damage can occur. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 5V SUPPLY. Drain to Source resistance for this electronic component is 4Ohm. 2-bits are supported.