MAX4644EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4644 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 12pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 5ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Switch-off Time-Max | 7.5ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Normal Position | NO/NC |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4644EUA+T Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. 8 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. A 3V voltage supply should turn on and run the electronic component. Into the electrical component body are injected 8 pins. Circuits based on SPDT switching are used to construct these analog switch ics. 1 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with MAX4644. Theswitch device is a typical Multiplexer or Switches. The voltage required by this switch device is 1.8V~5.5V, draining from a single voltage supply. Don't miss this electronic component's additional features, such as: CAN ALSO OPERATE WITH 5V SUPPLY.
MAX4644EUA+T Features
1 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE WITH 5V SUPPLY
MAX4644EUA+T Applications
There are a lot of Maxim Integrated MAX4644EUA+T Analog Switches & Multiplexers ICs applications.
- Mechanical reed relay replacement
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cable PC
- USB 1.1 signal switching circuits
- Medical
- Medical systems
- FTTH
- Intelligent PBX
- E1 Multiplexer
- HDTV
