MAX4646EUT-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 2.5Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4646 |
| Pin Count | 6 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 17pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 15ns, 10ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5V |
| Normal Position | NC |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
MAX4646EUT-T Overview
This electronic part is conveniently packaged in SOT-23-6, making it easy to ship abroad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. In total, 6 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. This electrical component is included in the 6 series of products. Based on SPST - NC switching circuits, these analog multiplexers work. The multiplexer consists of 1 circuits. Try searching for the analog switch ic with MAX4646 if you are looking for variants. A 2.5Ohm internal resistance characterizes this multiplexer. To find out what the 6 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The lowest voltage the electronic part should receive is 1.8V. The voltage required by this switch device is 1.8V~5V, draining from a single voltage supply.
MAX4646EUT-T Features
1 Channels
Switch Circuit: SPST - NC
MAX4646EUT-T Applications
There are a lot of Maxim Integrated MAX4646EUT-T Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- PDH Multiplexers
- FTTH
- Central office
- E1 Multiplexer
- Microprocessor Controlled Analog Systems
- Wireless Local Loop
- E1 Network Equipment
- SONET
- Frame Relay Equipment
