MAX4655EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4655 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Voltage - Supply, Single/Dual (±) | 9V~40V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| -3db Bandwidth | 210MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 77 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF 25pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 200ns, 100ns |
| Charge Injection | 23pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 200ns |
| Normal Position | NC |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX4655EUA+T Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). This analog switch is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. In total, 8 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. This electrical component is included in the 8 series of products. Multiplexers built on a SPST - NC switching circuit are built. There are 1 circuits in this switch device. Search with MAX4655 if you are looking for analog multiplexer variants. A analogue multiplexer of this type is a Multiplexer or Switches.
MAX4655EUA+T Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 210MHz
MAX4655EUA+T Applications
There are a lot of Maxim Integrated MAX4655EUA+T Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- Central office
- Fault Tolerant Systems
- Digital Cross-Connects
- HDTV
- Automatic test equipment
- Fiber In The Loop (FITL)
- Signal routing between systems
- Cellular phones
- Industrial control systems
